'S' - Line Reproduction Items

Prices valid 1st April 2008, local sales taxes & shipping extra. (Unless stated).

Collins Lapel Badges

Collins Lapel Badges. Quality chrome plated over brass.

 

Pricing:

Sold  individually, (Inc shipping in US only)         $ 12.50

 

 

New Collins Lapel Badges

Antenna Switch

Case size is the same as the 516F-2 power supply. ABS plastic trim with computer matched "Collins" paint.

Antenna Switch Specifications:

5 inputs to 5 outputs.  SO 239 connectors. Silver-plated ceramic switches, rated at 1.2 kW. Fitted with 4 ohm 10 W loudspeaker and loop through wiring for SWR / power meter. Rear view, shows input / output connectors and earthing point. A perfect addition to your CollinNo longer availables 'S' line range.

Pricing & Options:

Antenna Switch                                                     $ 280.00

Choice of round or winged emblems.

Antenna Switch (1.2 kW)

312B-3 Loud Speaker

Case size is the same as the original 312B-3 speaker. ABS plastic trim with computer matched "Collins" paint.

312B-3 Speaker Specifications:

Fitted with 4 OHM 10 watt tailored response speaker, lead and "phono" plug. Another perfect addition to yNo longer availableour Collins 'S' line range.

Pricing & Options:

312B-3 Loud Speaker                                      No longer available    $ 200.00

Choice of round or winged emblems.

Speaker Cabinet

516F-2 Replacement Cabinet (516F-2 PSU)

Case size is the same as the 516F-2 power supply. ABS plastic trim with computer matched "Collins" paint.

Case Specifications:

Pre-punched to take the 516F-2 power supply or can be used for a home built matching product. Another perfect addition to your Collins 'S' line range.

Pricing & Options:

516F-2 Cabinet                                  $ 185.00

Choice of round or winged emblems.

Speaker Cabinet

Collins Winged / Round Emblems - 'S' Line

Made under license from Rockwell-Collins. Identical in size to the original, complete with fixing clips. Quality chrome plated over brass.

Pricing:

Sold in packs of 2, (all types, inc shipping)          $ 25.00

 

 

Collins Winged / Round Emblems

ABS Plastic Trim / Front Grille / Pointer Knobs
Trim & Grille Specifications:

Suitable as a direct replacement for 'S' line products (312-B3, 516F-2, etc.) Identical size and colour to the original trim. Supplied complete with 4 new 'blackfaced' screws. Please specify hole punching for round or winged emblems (grille only).

Pricing & Options:

Replacement trim                                                   $ 18.00

Replacement grille                                                 $ 15.00

Pointer Knob Specifications:

Direct replacement, new pointer knobs to fit 1/4" diameter shafts, complete with stainless steel fixing "grub" screws.

Pricing & Options:

Pointer knobs, (5 pk for receiver)                         $ 28.00

Pointer knobs, (6 pk for transceiver)                    $ 33.60

ABS Plastic Trim / Front Grille / Pointer Knobs

Feet & Stand-off Kit 

Direct replacement, supplied complete with 4 rubber feet, 2 stand-off's, 4 sets of screws, nuts and washers.

Pricing & Options:

Feet & Stand-off Kit                                                $ 12.99

'S' Line Weighted Tuning Knob

Direct replacement, suitable for KWM - 2, 2A transceivers, plus the following receiver types; 75 S - 3 / A / B / C as well as 51 S -1 models. Weighs 8 1/2 oz, 240g (approx), supplied complete with fixing "grub" screws.

Pricing:

'S' Line Weighted Tuning Knob                             $   85.99

Inc shipping in (US only)

55G-1 Preselector / Speaker (Self Assembly Kit)

Case size is the same as the original 55G-1 unit. ABS plastic trim with computer matched "Collins" paint.

55G-1 Preselector / Speaker Specifications:

Supplied with all necessary components to assemble your own unit. Complete with instructions.

Pricing & Options:

55G-1 Preselector / Speaker (Self Assembly Kit). $ TBA

Choice of round or winged emblems.

'A' - Line Reproduction Items

Prices valid 1st January 2004, local sales taxes & shipping extra. (Unless stated).

Large Collins Winged Emblems

Suitable for the older Collins equipment; i.e. 75A1, 2, 3 & 4 receivers as well as 32V type transmitters. Made under license from Rockwell-Collins. Identical in size to the original, complete with fixing thumbwheels. Quality chrome plated over brass.

Pricing:

Sold individually as single units, (inc shipping)    $ 25.00

 

 

270G-1 Loud Speaker
Case size is the same as the original 270G-1 speaker. With computer matched, 'St James's Grey', wrinkle finish 'Collins' paint complete with chrome trim and emblem.

270G-1 Speaker Specifications:

Fitted with 8" tailored response speaker, lead with twin 'spade' terminals. Another perfect addition to your Collins 'A' line range. Suitable for Collins 75A-1 receivers.

Pricing:

270G-1 Loud Speaker                                          $ 265.No longer available00

270G-2 Loud Speaker
Case size is the same as the original 270G-2 speaker. With computer matched, 'St James's Grey', wrinkle finish 'Collins' paint with silver-grey flocked grill.

270G-2 Speaker Specifications:

Fitted with 4 OHM 10" tailored response speaker, lead with twin 'spade' terminals. Another perfect addition to your Collins 'A' line range. Suitable for Collins 75A-2, A-3 & A-4 receivers.

Pricing:

270G-2 Loud Speaker                                          $ 265.00No longer available

"National" Diamond Emblems - Available Now!

"National" diamond-shape speaker emblem manufactured in quality nickel plate over brass.

Pricing:

1 off (each, inc shipping in US only)                         $ 35.00

2 or more (each, inc shipping in US only)                $ 30.00

 

Please e-mail your requirements along with your intended delivery address, and we will return a full order value along with preferred payment details.

Copyright © 2008 Advanced Optics Limited. All rights reserved.
 Anti Spam Link! : Fortune-Magnet : JecobinPlans : NutsAboutKits : Aircraft-Art